LB 80 Electric Steam Generators

LB-80 (C) 75 Kilowatt (kW) Electrical Power Rating Cleaner Electric Steam Generator

Dimensions

Length	46 in
Width	30 in
Height (No Options)	37 in

Minimum Clearance

Height (with Portable Mounting option)	46 in54 in
Total Length	90 in
Total Width	60 in
Total Height (No Options)	45 in

Downloads

Industry Standards

American Society of Mechanical Engineers (ASME) - Boiler and Pressure Vessel Code
American Society of Mechanical Engineers (ASME) - CSD-1
Canadian Underwriters Laboratories (cUL)
Underwriters Laboratories (UL)

Standard Features

ASME Certified	High Pressure Safety Reset
UL Listed and labeled under UL 834	Dual Pressure Controls (UL 353)
Low Level Cut-Off (LLCO) (UL 353)	Safety Relief Valve possessing the ASME V Mark

Included Options (Standard for Cleaners)

Heavy-Duty Steam Gun (10 ft Hose)

Solution Bucket

Recommended Options (Non-Standard)

Portable Mounting	Single Service Transformer
Spare Parts Package	Solution Mixer

Specifications

Brands	Electro-Steam™
Variant	Cleaner
Electrical Power	75 kW
Power Supply Voltage¹	208 VAC, 230 VAC, 380 VAC, 415 VAC, 440 VAC, 480 VAC, 600 VAC
Phase	3
Frequency	50 Hz, 60 Hz
Boiler Horse Power	7.5 bhp
Steam Capacity²	258.8 lb/hr (117.37 kg/hr)
Water Consumption	31.01 gal/hr (117.37 L/hr)
Gross British Thermal Units (BTU) Output	251,065 Btu/hr
Maximum Boiler Pressure	100 psi
Operating Pressure	0 to 85 psi
Note for Operating Pressure	Factory Set at 85 psi
Maximum Boiler Capacity	26.5 gal
Boiler Fill Capacity	22.0 gal
Boiler Material³	Carbon Steel
Cabinet Material	304 Stainless Steel
Plumbing Material	Brass (Schedule 40), Carbon Steel (Schedule 40)

Amperage by Voltage (3Ø Phase)

208 VAC	240 VAC	380 VAC	415 VAC	440 VAC	480 VAC	600 VAC
208.20 A	196.50 A	114.00 A	104.30 A	98.40 A	90.20 A	72.20 A

Plumbing Connection Sizes

Water Inlet	1/2" NPT (National Pipe Thread) (Female) - Y-Strainer, Brass
Steam Outlet	1/4" NPT (National Pipe Thread) Union - Gun Connection
Safety Valve	3/4" NPT (National Pipe Thread) (Female) - Safety Valve, Brass
Drain	1" National Pipe Thread (NPT) (Female) - Ball Valve, Brass

Options

Heavy-Duty Steam Gun	Supplied standard with all LB Cleaner Models that are 40 kW or greater. The Heavy-Duty Steam Gun includes an adjustable solution valve to siphon a chemical solution from a reservoir at an adjustable flow rate. This chemical solution mixes with the discharging steam before exiting the gun. The standard attached Steam/Detergent Hose length is 10 ft; additional lengths are available upon request. (Sized in 10 ft increments)
Heat Resistant Gloves	Supplied standard with all Cleaner Models. Heat Resistant Gloves must be worn while operating/handling the steam gun.
Solution Bucket	Supplied standard with all Cleaner Models. The Solution Bucket hangs off the side of the steam generator and holds the chemical solution for the steam gun; it is strategically positioned for the steam gun to easily siphon from during operation.
Spare Parts Package Includes	18-Month Warranty (12-Month Standard) (2) Electric Heaters and (2) Heater Gaskets (2) Sight Glass Tubes and (4) Washers (1) Pressure Control (1) Contactor
Solution Mixer	Solution Mixer attaches to the Solution Bucket; it automatically keeps the solution bucket full, while mixinga consistent ratio of solution and water.
Portable Mounting Includes	Wheels Push Handle Single Service Transformer Option
Single Service Transformer	Supplied standard with all portable steam generators, the Single Service Transformer steps down the primary high voltage to provide 120 VAC Single Phase (1Ø) to the controls; with this option, only the one (1) primary high voltage supply is required.
Flare Nozzle	Nozzle attachment for the Heavy-Duty Steam Gun that concentrates the flow of steam into a flat jet.
Manual Low Water Reset⁴	Manual Low Water Reset trips if the electric heaters shut-off because of a low water condition. Reset must be manually pressed to resume steam production.
Deluxe Steam Gun	Supplied standard with all LG Cleaner Models. The Deluxe Steam Gun includes an adjustable solution valve to siphon a chemical solution from a reservoir at an adjustable flow rate. This chemical solution mixes with the discharging steam before exiting the gun. The standard attached Steam/Detergent Hose length is 10 ft; additional lengths are available upon request. (Sized in 10 ft increments)
Water Feed Booster Pump	Supplied standard on any steam generator with an operating pressure higher than 15 psi. The Water Feed Booster Pump increases your incoming water pressure to overcome the operating pressure of the steam generator. The Pump requires a 5-150 psi water supply with a minimum flow rate of 2 gpm.

¹ Each Electro-Steam™ electric steam generator requires two (2) power supplies: One (1) primary high voltage supply and one (1) secondary 120 VAC 1Ø, 50/60 Hz supply. Each generator is custom built to accommodate only one (1) customer specific high voltage supply for the heaters. 120 VAC 1Ø, 50/60 Hz must also be supplied for the controls, unless the Single Service Transformer option is added.
² Calculations are based off of a 212 ºF boiler feed-water temperature. Boiler feed-water temperatures that range between 60 ºF and 140 ºF, are approximately 80% to 90% of the calculated values shown. Boiler feed-water must not exceed 140 ºF.
³ Wetted Surfaces.
⁴ A Manual Low Water Reset Button is supplied standard with every steam generator, but it is disabled. If this Reset Button is required as per your local boiler codes, simply plug the two attached wires into the PC-Board terminals labeled "Reset".

Free Resource

Conveyor Belt Cleaning Solutions eBook cover

Conveyor Belt Cleaning Solutions for the Food & Beverage Industry

Learn how all-electric dry steam sanitation is transforming hygiene standards across food processing and beverage operations. Download our free industry guide.

Download Free eBook

Get in Touch

Ready to Find the Right Steam Solution?

Our engineering team is here to help you select the right generator for your application. Custom specifications, expert guidance, same-day part shipping.

Request a Quote Request a Demonstration